Buy Contact Lens Solutions Online Dubai

Cleaning contacts isn't difficult, but it is a task that must be completed on a regular basis, with care, and with the appropriate instruments, such as contact lens solutions.

Reasons to use Contact Lens Solutions

Infection prevention is one of the most important reasons to use contact solutions.

Contact lenses take a bit more attention on a daily basis than Reading glasses, not just to improve your vision but also to safeguard your eyes. It's vital to clean, disinfect, and store your contact lenses properly to avoid infection.

Keratitis is the most frequent eye infection caused by wearing contact lenses. The cornea — the transparent, dome-shaped covering on the front of the eye that permits light to enter the eye — is characterized by inflammation (swelling). While bacteria, viruses, parasites, and fungus can cause infectious keratitis, noninfectious keratitis can be caused by a small injury or wearing contacts for too long.

محلول العدسات اللاصقة

Contact solution performs a number of important responsibilities in contact lens maintenance, from cleaning your contacts to properly storing them. Knowing how to care for your contact lenses and cases can help you avoid illness and the harmful effects of bacterial accumulation. Before you begin, make sure you thoroughly wash your hands with soap and hot water. If at all feasible, use antibacterial soap. Soaps that are based on oil or lotion might haze or tarnish your lenses.

Step 1: Scrub your contact lenses first.

In the palm of your hand, place the contact.

Apply the contact lens solution to the contact with your other hand until it is completely submerged in the solution.

Rub the contact on both sides with your index finger for 10-15 seconds. Scrubbing the contact lens too vigorously might cause it to tear and become unfit for usage. Make sure your fingernails don't contact the lens. They're not only sharp, but they're also a haven for dirt and bacteria.

It is not suggested to clean your lenses with tap water, saliva (spit), or saline solution.None of these will disinfect your lenses, and several of them may potentially introduce germs and bacteria.

Step 2: Place Contact Lenses in a Secure Location After scrubbing both sides of the contact lens, do the following:

Fill the reservoir with contact lens soaking solution until the lens is completely soaked, then place the contact in the case.

Make sure the lens is not folded and is completely covered. The soaking solution may not reach all portions of the contact if this is not done.

Screw the case cap on tightly after the contact is in the solution-filled case. Do not place the case on its side or upside down. If you do this, the contact may slide out of the solution and not be cleaned correctly.

Step 3: Soak Contact Lenses in an Approved Solution.

After you've correctly saved your contacts:

Soak them in the solution overnight or according to the package directions. Your contacts should be free of dirt and debris after soaking for the required amount of time, and ready to be placed onto your eyes.

If your contact lenses still have dirt or debris on them, repeat Step 1 before putting them back in your eyes.

Contact lens products should not be combined. The chemicals employed in each care system are intended to work together. Alternative products may cause chemical reactions that damage or discolor lenses, hurt your eyes, or diminish the product's desired impact. Don't do it unless you're a chemist.